F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Stabilizer Link: Service and Repair
Front
Stabilizer Bar and Link - F-250, F-350, Excursion
Removal and Installation
1. CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in
major service expense. They must be replaced with the same part number or an equivalent part if replacement is necessary. Do not use a
replacement part of lesser quality or substitute design. Torque values must be used as specified during reassembly to ensure proper retention of
these parts.
Raise and support the vehicle.
2. Remove the bolts and the retainer brackets.
3. Remove the nuts, bolts, washers and the stabilizer bar and links.
4. To install, reverse the removal procedure.