F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Wheel Fastener: Service and Repair
Front
Wheel Studs - F-250, F-350, Excursion
Removal
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the disc brake caliper and the disc brake rotor.
4. Using a suitable press, remove the lug bolt from the disc brake rotor and discard.
Installation
1. Using a suitable press, install the new lug bolt aligning the serrations in the disc brake rotor flange made by the original lug bolt.
2. Install the disc brake rotor and disc brake caliper.
3. Install the wheel and tire assembly.
4. Lower the vehicle.
