F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Parking Pawl: Service and Repair
4R100 Automatic Transmission
Park System
Removal
NOTE: For internal park mechanism service, refer to Manual Control Lever Shaft and Seal.
1. Remove the extension housing and the extension housing gasket. For additional information, refer to Extension Housing Gasket - F-Super Duty or
Extension Housing Gasket - Excursion.
2. Remove the parking rod guide plate.
1
Remove the bolts.
2
Remove the parking rod guide plate.
3. NOTE: If the installation of a new park gear is required, refer to Output Shaft - Check.
Remove the park pawl shaft.
1
Remove the park pawl return spring.
2
Remove the park pawl.
3
Remove the park pawl shaft.
Installation
1. NOTE: If the installation of a new park gear is required, refer to Output Shaft - Check.
Install the park pawl shaft.
