F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
8. Remove the bolts and the transmission extension housing.
9. Remove and discard the extension housing gasket.
Installation
All vehicles
1. NOTE: The extension must have a shoulder or a boss cast in it to hold the orifice lube plug in the back of the case. If the wrong extension
housing is used, the plug may become loose and/or fall out and cause transmission damage.
NOTE: Lightly lubricate the gasket with petroleum jelly to hold it in place during assembly.
Install the new extension housing gasket.
1
Verify that the extension has a shoulder cast in it.
2
Install the new extension housing gasket.
2. Install the extension housing bolts.
