F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Shifter A/T: Service and Repair
Transmission Selector Lever
Transmission Selector Lever
Removal and Installation
1. Remove the ignition switch lock cylinder.
2. Remove the upper steering column shroud.
3. Remove the gearshift lever.
1
Disconnect the electrical connector.
2
Remove and discard the gearshift lever pin.
3
Remove the gearshift lever.
4. NOTE: The gearshift lever pin must be replaced whenever removed.
To install, reverse the removal procedure.
