F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
6. Disconnect the hoses at the auxiliary transmission fluid cooler.
7. NOTE: The LH and RH air deflectors must be moved to access the bolts.
Remove the auxiliary transmission fluid cooler upper bolts.
8. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer Maintenance/Service and Repair.
9. If equipped, remove the 6 retainers and the lower front bumper filler.
10. Remove the lower splash shield push pins and position the splash shield forward.
