F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Pinion Gear: Service and Repair
Dana S110
Drive Pinion
Special Tool(s)
Material
Disassembly
1. Remove the hex nut.
2. CAUTION: Hammering on the pinion flange will close in the bearing bores and misalign the flange lugs. This will result in premature failure of
the journal needle bearings. Serious damage will also occur internally to the differential ring gear and pinion set or pinion bearings by hammering
on external parts. Remove and install the pinion flange using only the procedures.
Using the special tool, remove the pinion flange.