F 250 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
To install, reverse the removal procedure,
2. Install the front disc brake rotor.
Rear
Removal
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. CAUTION: Clean off dirt and debris that may have collected around the rear anti-lock brake sensor before removal to prevent fluid
contamination.
Remove the rear anti-lock brake sensor.
1
Disconnect the electrical connector.
2
Remove the bolt.
3
Remove the rear anti-lock brake sensor.
