F 250 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Rear Anti-Lock Brake System
Removal
1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
On diesel equipped vehicles, remove the battery tray.
2. On gas equipped vehicles, disconnect the battery tray ground cable.
3. On gas equipped vehicles, remove the engine air cleaner assembly.
4. On gas equipped vehicles, remove the EVAP canister.
5. Remove rubber dust cover.
-
Remove pushpin.
6. Disconnect the anti-lock brake control module electrical connectors.
7. WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally,
drink water and induce vomiting. Get medical attention immediately.
CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately
wash it with water.
NOTE: Plug each port to prevent brake fluid from spilling.
Disconnect the hydraulic brake lines.
