F 250 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
1.
WARNING: THE PARKING BRAKE CONTROL ASSEMBLY IS UNDER TENSION. USE CAUTION WHEN INSTALLING IT IN THE
VEHICLE.
Position the new parking brake control assembly into the vehicle and seat the grommet.
2.
Connect the hood release cable onto the parking brake control assembly.
3.
Position the parking brake control assembly onto the mounting studs and install the three (3) nuts. Tighten the nuts to 25 Nm (19 lb-ft).
4.
Install the left kick panel trim cover.
