F 250 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
Parking Brake Shoe: Service and Repair
Special Service Tool(s)
Removal
WARNING: Asbestos fiber dust can be present on brake and clutch assemblies and is hazardous if inhaled. Brake and clutch assemblies must
be cleaned using a vacuum cleaner recommended for use with asbestos fibers such as a brake/clutch/service vacuum. The bag must be labeled
per OSHA instruction, sealed, and the trash hauler notified as to the bag's contents. If a vacuum suitable for asbestos is not available,
cleaning must be done wet. If dust generation is still possible, technicians must wear government-approved toxic dust purifying respirators.
WARNING: Occupational Health And Safety Act (OSHA) requires areas where asbestos dust generation is possible to be isolated and posted
with warning signs. Only technicians performing brake or clutch repair are to be present in the area.
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the rear disc brake rotor.
4. Disconnect the rear parking brake cable at the parking brake cable equalizer.
5. Disconnect the parking brake cable at the parking brake lever.
