F 250 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
Valve Cover: Service and Repair
Left Side
Removal
1. Disconnect both battery ground cables.
2. Remove the charge air cooler outlet duct.
3. Remove the inlet duct, tube and bracket assembly.
4. Disconnect the fuel injector/glow plug nine pin connector.
1. Disconnect the retaining clip.
2. Disconnect the nine pin connector.
5. Disconnect the engine control sensor wiring.
6. Remove the valve cover.
1. Remove the ten bolts.
2. Remove the valve cover.
