F 250 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
Hazard Warning Switch: Service and Repair
Removal
1. Remove the ignition switch lock cylinder.
NOTE: The steering wheel has been removed for clarity.
2. If equipped, twist the tilt wheel handle and shank and remove.
3. Remove the upper and lower steering column shrouds.
1
Remove the screws.
2
Remove the lower steering column shroud.
3
Remove the upper steering column shroud.
4. Remove the multi-function switch.
1
Remove the screws.
2
Disconnect the electrical connectors.
3
Remove the multi-function switch.
Installation