F 250 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
Ignition Switch Lock Cylinder: Service and Repair
Key Release Button
Removal
1. Remove the ignition switch lock cylinder.
NOTE: Steering wheel removed for clarity.
2. If equipped, remove the tilt wheel handle and shank.
3. Remove the upper and lower steering column shrouds.
1
Remove the screws.
2
Remove the lower steering column shroud.
3
Remove the upper steering column shroud.
4. Remove the key release button.
1
Remove the bolt.
2
Remove the spring.
3
Remove the key release button.
Installation