F 250 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
Wheel Bearing: Service and Repair
Front
Removal
1. Raise and support the vehicle.
2. Remove the front wheel and tire assemblies.
3. Remove the front disc brake caliper and rotor, and position the caliper out of the way.
4. Remove the hub cap from the hub assembly.
5. Remove the cotter pin, adjusting nut and flatwasher.
6. NOTE: Inspect the condition of the spindle and nut threads to ensure a free turning nut when reassembling.
Remove the outer bearing cone and roller assembly, and pull the hub assembly from the spindle.
