F 250 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
5. NOTE: The park gear and output shaft drive sprocket speed sensor wheel will require removal/replacement if damaged.
If required, use an arbor press to remove the park gear. Remove the park gear.
6. NOTE: If you are replacing only the output shaft drive sprocket speed sensor wheel, the park gear will need to be removed first.
If required, remove the output shaft drive sprocket speed sensor wheel (if equipped).
Assembly
NOTE: If any damage is found to the output shaft drive sprocket wheel it must be replaced.
1. If removed, using the arbor press to install the park gear, press the park gear onto the output shaft until it stops at the shoulder on the output shaft.
2. If removed, install the output shaft drive sprocket speed sensor wheel using the installation tool.