F 250 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
Clutch Pedal Assembly: Service and Repair
Removal
1. CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface wash it
immediately with water.
Disconnect the clutch master cylinder push rod.
2. Remove the push rod bushing and discard.
3. Remove the clutch pedal from the pedal support bracket.
Installation
1. Install the clutch pedal assembly.
^
Install the clutch pedal bushings and washers.
^
Install the clutch pedal shaft to the clutch pedal support.
2. Install the new push rod bushing.