F 250 4WD HD Pickup V8-460 7.5L VIN G EFI (1997)
![background image](/ford/f_250_4wd_hd_pickup/v8-460_7.5l_vin_g_efi/Page-2479006.png)
top cover retaining tab openings in the bumper. These are the areas that let the back side rust bleed to the front of the bumper and cause stain.
5.
Lower vehicle.
6.
Reinstall spare tire.
7.
Clean off overspray as needed.
1997 Econoline - Front Bumper
1997 ECONOLINE - FRONT BUMPER
1.
Hoist vehicle until bumper is at working level.
2.
Remove the two (2) lower valance push pins and remove valance.
3.
Tape the air intake opening.
4.
Clean excessive dirt from inside and outside the bumper.
5.
Spray the edge of the air intake opening and the bumper cover retainer openings with Super Seal Anti-Corrosion Compound.
6.
Remove tape and reinstall the lower valance push pins.
7.
Lower vehicle.
8.
Clean off overspray as needed.