F 250 4WD HD Pickup V8-460 7.5L VIN G EFI (1997)
INSTALLATION
1. Position the rear door window glass into the rear door window opening.
2. Insert the rear door window regulator arm into the rear door window glass channel.
3. Install the rear door glass run into the rear door.
4. Position the rear door glass run front lower retainer in the rear door.
5. Seat the rear door glass run in the rear door glass run front lower retainer.
6. Install the two rear door glass run front lower retainer-to-rear door screws.
NOTE: Only one screw is shown.
7. Lower the rear door glass and install the inside and outside rear door glass weatherstrips.
8. Operate the rear door window glass and check for binding or looseness. Adjust the front and rear door glass run lower retainers as necessary.
9. Install the rear door trim panel.