F 250 4WD HD Pickup V8-460 7.5L VIN G EFI (1997)
21. Seat the front bearing cone, using Bearing Cone Replacer T88T-2598-F.
22. NOTE: For mainshaft end play measurement, install the mainshaft spacer without the O-ring.
Transmission Mounted Parking Brake Disassembly And Assembly
Install the mainshaft spacer.
23. Install the lock nut washer.
Transmission Mounted Parking Brake Disassembly And Assembly
24. Install a new lock nut and, using 2 9/16-Inch Hex Locknut Wrench T70T4252-D, tighten to 288-292 Nm (213-215 lb-ft).
25. Remove the parking brake from the vise and position on a smooth flat surface with the output flange down.
