F 250 4WD HD Pickup V8-460 7.5L VIN G EFI (1997)
7. Carefully disengage fuel injection supply manifold from fuel injectors and remove fuel injection supply manifold.
INSTALLATION
1. Make sure injector caps are clean and free of contamination.
2. Place the fuel injection supply manifold over each of the fuel injectors and seat fuel injectors into fuel injection supply manifold. Make sure fuel
injectors are properly seated.
3. Secure fuel injection supply manifold using four retaining bolts. Tighten to 8-12 Nm (71 106 lb in).
4. Connect fuel inlet and outlet lines at fuel injection supply manifold connections. Push in to connect.
5. Install fuel line-to-fuel injection supply manifold retaining clips.
6. Connect vacuum hose to fuel pressure regulator.
7. Install upper intake manifold.
8. Perform post-service procedures. See: Service and Repair
