F 250 4WD HD Pickup V8-460 7.5L VIN G EFI (1997)
3. Install a new cotter pin.
2. Install the front suspension arm lower ball joint castellated nut.
1. Position the front wheel knuckle.
2. Install the front suspension arm lower ball joint castellated nut.
3. Install a new cotter pin.
3. Install the front shock-absorber lower bolt and nut to the front suspension lower arm.
4. Install the tie rod end castellated nut.
1. Position the tie rod end.
2. Install the tie rod end castellated nut.
3. Install a new cotter pin.
5. Load the torsion bar.
1. Install the torsion bar adjuster.