F 250 4WD HD Pickup V8-460 7.5L VIN G EFI (1997)
2. Install Torsion Bar Tool with the Torsion Tool Adapters in the B slots on the Torsion Bar Tool.
3. Tighten the Torsion Bar Tool to load the torsion had.
4. Install the torsion bar adjuster nut.
5. Install the torsion bar adjuster bolt.
6. Remove the Torsion Bar Tool.
-
Turn the torsion bar adjuster until the reference marks align.
-
Repeat for the other side.
6. Install the wheel hub.
7. If equipped with 4WABS. install the anti-lock sensor wire bracket bolt.
1. Position the anti-lock sensor wire.
2. Install the bolt.
8. Adjust the ride height.
