F 250 4WD HD Pickup V8-460 7.5L VIN G EFI (1997)
9.
Remove and discard hub 0-ring and any remaining pieces from the front and rear hubs.
10.
Install wheel and tire assemblies.
NOTE:
Do not tighten lug nuts to final torque at this time.
11.
Install new lug nuts and tighten enough to securely mate wheel against rotor/drum.
12.
Lower vehicle and tighten lug nuts in sequence shown to 136 Nm (100 lb-ft). See Figure 4.
13.
Install center caps.