F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
Lock Cylinder Switch: Service and Repair
REMOVAL
NOTE: Steering wheel removed for clarity.
1. If equipped, twist the tilt wheel handle and shank and remove.
2. Remove the lower steering column shroud.
1. Remove the lower steering column shroud screws.
2. Remove the lower steering column shroud.
3. Remove the ignition switch lock cylinder.
1. Insert the ignition key into the ignition switch lock cylinder and turn to RUN position.
2. Push the (A) ignition switch lock cylinder release tab with a punch while pulling out the (B) ignition switch lock cylinder.
4. Carefully pry to release the four clips and remove the steering column opening cover.