F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
Wheel Speed Sensor: Service and Repair
4 Wheel Antilock Brake System
Front
REMOVAL:
Front Brake Anti-Lock Sensor Electrical Connector
1. Disconnect the front brake anti-lock sensor electrical connector.
2. Remove the front disc brake rotor shield; refer to Section.
Front Brake Anti-Lock Sensor Removal
3. Remove the two front brake anti-lock sensor bolts (A) and the front brake anti-lock sensor (B).
INSTALLATION:
Front Brake Anti-Lock Sensor Bolt Torque Specifications
1. To install, reverse the removal procedure.
Rear
REMOVAL:
NOTE:Clean off dirt and debris that may have collected around the rear brake anti-lock sensor before removal to prevent fluid contamination.
