ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Radiator Hose > < Radiator Cap|Description and Operation
Page 1
background image

Radiator Cap: Testing and Inspection

WARNING: NEVER REMOVE THE PRESSURE RELIEF CAP UNDER ANY CONDITIONS WHILE THE ENGINE IS OPERATING.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DAMAGE TO THE COOLING SYSTEM OR ENGINE AND/OR
PERSONAL INJURY. TO AVOID HAVING SCALDING HOT COOLANT OR STEAM BLOW OUT OF THE COOLING SYSTEM, USE
EXTREME CARE WHEN REMOVING THE PRESSURE RELIEF CAP FROM A HOT RADIATOR COOLANT RECOVERY
RESERVOIR. WAIT UNTIL THE ENGINE HAS COOLED, THEN WRAP A THICK CLOTH AROUND THE PRESSURE RELIEF CAP
AND TURN IT SLOWLY ONE TURN (COUNTERCLOCKWISE). STEP BACK WHILE THE PRESSURE IS RELEASED FROM THE
COOLING SYSTEM. WHEN CERTAIN ALL THE PRESSURE HAS BEEN RELEASED, REMOVE PRESSURE RELIEF CAP (STILL
WITH A CLOTH).
 

1. Remove the pressure relief cap from the radiator coolant recovery reservoir.
2. Immerse the pressure relief cap in water and install it on the shallow filler neck of Radiator/Heater Core Pressure Tester and Radiator Cap

Adapter, part of Radiator/Heater Core Pressure Tester.

3. Immerse the filler neck seal in water and install it in the filler neck adapter.
4. Install the filler neck adapter with the filler neck seal to Radiator Cap Adapter.
5. Connect the female quick-connect fitting of the pressure test pump to the male quick-connect fining of the filler neck adapter.
6. Slowly depress the plunger of the pressure test pump until the pressure gauge reading stops increasing and note the highest pressure reading

obtained.

NOTE:  If the plunger of the pump is depressed too fast, an erroneous pressure reading will result.

7. Release the pressure by turning the relief screw counterclockwise. Then tighten the pressure relief screw and repeat Step 6 (at least twice) to

ensure the reading is repeatable within the specifications of the pressure relief cap.

8. If the pressure test gauge readings are not within specifications, replace the pressure relief cap. If the pressure test gauge readings are within

specifications, perform the cooling system Pressure Test.

Radiator Hose > < Radiator Cap|Description and Operation