F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
Connecting Rod: Testing and Inspection
Connecting Rod Bearing Journal Clearance
NOTE: The crankshaft connecting rod journals must be within specification to check the connecting rod bearing journal clearance.
1. Remove the connecting rod bearing cap.
2. Position a piece of Plastigage(R) across the bearing surface.
3. Install and torque to specifications, then remove the connecting rod bearing cap.
NOTE: Do not turn the crankshaft during this step.
4. Measure the Plastigage(R) to get the connecting rod bearing journal clearance. The Plastigage(R) should be smooth and flat. A changing width
indicates a tapered or damaged connecting rod bearing or connecting rod.
Connecting Rod Bend
Measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement is
within specification.
Connecting Rod Bushing Diameter