F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
5. Connect the IMTV electrical connector.
6. Position the (A) thermostat housing and start the two (B) thermostat housing bolts.
NOTE: Make sure that the thermostat is in the correct position before the thermostat housing is installed.
7. Tighten the intake manifold bolts in the two stages, in the sequence shown.
^
Stage 1: 2 Nm (18 inch lbs.).
^
Stage 2: 20-30 Nm (15-22 ft. lbs.).