F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
Installation
INSTALLATION
NOTE:A new IAC valve gasket must be installed.
1. Install the IAC valve.
1
Position the IAC valve and gasket.
2
Install the bolts in two stages:
-
8-10 Nm (71-89 in lb)
-
10-11 Nm (89-95 in lb)
2. Connect the throttle bypass hose and the IAC electrical connector.
3. Install the accelerator control splash shield.
4. Connect the battery ground cable
