F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
Alignment: Service and Repair
Toe
1. Start the engine and center the steering wheel.
2. Turn the engine off, and hold the steering wheel in the "straight forward" position by attaching, a rigid link from the steering wheel to the brake
pedal.
3. Check the toe settings; follow manufacturer's instructions.
4. Hold the (A) tie rod end while loosening the (B) toe set jam nuts.
5. Rotate the (A) front wheel spindle tie rod adjusting sleeve to desired position.
6. Tighten the toe set jam nuts.