F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
3. Install the (A) transmission insulator and the (B) bolts.
4. Install the vehicle speed sensor (VSS).
(1) Position the VSS.
(2) Install the bolt.
(3) Install the electrical connector.
5. Lower the transmission jack while aligning the (A) transmission insulator and retainer studs with the holes in the (B) transmission support
crossmember. Allow the full weight of the transmission to rest on the transmission support crossmember.
6. Install the transmission insulator and retainer-to-crossmember retaining nuts.
