F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
4. Assemble and position Pinion Depth Gauge Set.
(1) Position Screw.
(2) Position Aligning Adapter.
(3) Position Gauge Disc.
(4) Position Gauge Block.
(5) Position the differential pinion bearing.
(6) Position the differential pinion bearing.
(7) Thread on Driver Handle.
NOTE: Apply only a light oil film on the pinion bearings before performing this measurement.
5. Tighten Driver Handle.
6. Rotate the gauge block several half turns to ensure proper seating of the pinion bearings, and position the gauge block.
NOTE: The gauge block must be offset to obtain an accurate reading.
