F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
6. Mark the (A) driveshaft rear axle companion flange in relation to the (B) drive pinion stem to insure proper alignment during installation.
7. Use Differential Side Bearing Puller to remove the rear axle companion flange.
INSTALLATION
1. Lubricate the rear axle companion flange splines.
-
Use Motorcraft Synthetic Rear Axle Lubricant F1TZ-19580-B or equivalent meeting Ford specification WSL-M2C192-A.
2. Align the (A) rear axle companion flange with the (B) drive pinion shaft.
NOTE: Disregard the scribe marks if a new rear axle companion flange is being installed.
3. Use Companion Flange Replacer to install the rear axle companion flange.