F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
Universal Joint: Service and Repair
Disassembly and Assembly
Double Cardan
DISASSEMBLY
1. Place the driveshaft on a suitable workbench.
CAUTION: Do not clamp the driveshaft in a vise or similar holding fixture.
2. Index the driveshaft components.
NOTE: If components are not marked and installed correctly, driveline imbalance may occur.
3. Clamp U-Joint Tool in a vise.
4. Remove the four driveshaft centering socket yoke universal joint snap rings.