F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
Gear Sensor/Switch: Service and Repair
REMOVAL
1. Raise and support the vehicle.
WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING,
JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR
SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED
INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE
OPERATIONS.
2. Remove the 4WD indicator switch.
(1) Disconnect the 4WD indicator switch electrical connector.
(2) Remove the 4WD indicator switch
INSTALLATION
1. To install, reverse the removal procedure.
2. Lower the vehicle.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.