F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
Back Window Glass: Service and Repair
REMOVAL
1. Remove the rear seat back.
1. Remove the bolts.
2. Lift up to remove the rear seat back.
2. Lower the back half of the roof trim panel.
3. Cut the foam butyl from around the back window glass.
4. Remove the back window glass.
1. Remove the 12 nuts.
2. Remove the back window glass.
5. Remove any remaining foam butyl from the window glass frame.
INSTALLATION
1. Clean the back window glass with an alcohol-free cleaner.
2. Apply 8 mm foam butyl (part of EOAZ-19562-A), or equivalent meeting Ford specification WSB-M2G234-C to the back window glass.
-
Start at the bottom middle and work around.
3. Install the back window glass.
1. Position the back window glass.
2. Install the 12 nuts.
4. Install the roof trim panel.
