F 250 4WD Pickup V6-4.2L VIN 2 (1998)
CAUTION: Do not get dirt in the rear axle housing.
2. Measure the clearance between the rear anti-lock brake sensor pole piece and the rear anti-lock brake sensor indicator.
3. Install the rear anti-lock brake sensor.
1
Position the rear anti-lock brake sensor and install the bolt.
2
Connect the electrical connector.
CAUTION: Do not apply force to the plastic rear anti-lock brake sensor electrical connector. The rear anti-lock brake sensor should slide into the
mounting opening.
Front
REMOVAL
1. Disconnect the battery ground cable.
2. Disconnect the front brake anti-lock sensor electrical connector.
3. Remove the front disc brake rotor shield.
