F 250 4WD Pickup V6-4.2L VIN 2 (1998)
Brake Caliper: Service and Repair
Rear
Adapter
REMOVAL
1. Disconnect the rear parking brake cable guide.
2. Remove the axle shaft.
3. Remove the nuts and the rear wheel disc brake adapter.
INSTALLATION
1. Follow the removal procedure in reverse order.
Disassembly and Assembly
DISASSEMBLY
1. Remove the rear disc brake caliper.
2. Drain the remaining brake fluid from the rear disc brake caliper.
3. Secure the rear disc brake caliper in a vise.
4. Remove the rear disc brake piston.
1
Place a block of wood between the caliper bridge and the rear disc brake piston.
2
Apply low air pressure to the fluid port in the rear disc brake caliper.
3
Force the rear disc brake piston out to the block of wood.
4
Remove the block of wood and the rear disc brake piston.