F 250 4WD Pickup V6-4.2L VIN 2 (1998)
1. Follow the removal procedure in reverse order
With Rear Drum Brakes
REMOVAL
1. Relieve the tension on the parking brake system.
1
Pull the front parking brake cable and conduit.
2
Insert a suitable retainer.
NOTE: Make sure the parking brake control is fully released.
2. Raise and support the vehicle.
WARNING: THE ELECTRICAL POWER SUPPLY TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO
HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE
AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED
INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE
OPERATIONS.
3. Remove the rear brake drums.
4. Disconnect the parking brake rear cable and conduit from the parking brake cable equalizer.