F 250 4WD Pickup V6-4.2L VIN 2 (1998)
1. Assemble the fan clutch to the fan blade assembly.
1
Position the (A) fan clutch on the (B) fan blade assembly.
2
Install the bolts.
2. Position the fan shroud and the fan blade assembly.
3. Install the fan shroud.
1
Lower the fan shroud onto the radiator clips.
2
Install the screws.
4. Install the fan blade assembly and fan clutch.
1
Position the fan blade assembly and fan clutch on the water pump pulley.
2
Use the fan clutch holding tool to hold the water pump pulley steady.
3
Use the fan clutch wrench to install the fan blade assembly and fan clutch.
5. Connect the overflow hose to the radiator.
1
Push the overflow hose onto the radiator fitting.
2
Position and tighten the hose clamp.
