F 250 4WD Pickup V6-4.2L VIN 2 (1998)
2. Install the bolt.
NOTE: The crankshaft pulley position on the crankshaft damper was marked before removal; return it to the same position.
3. Install the crankshaft pulley.
1
Position the crankshaft pulley.
2
Install the bolts.
4. Lower the vehicle.
5. Connect the battery ground cable.
6. If equipped with air suspension, reactivate the system by turning on the air suspension switch.
7. Install the fan blade assembly.
8. Install the drive belt.
