F 250 4WD Pickup V6-4.2L VIN 2 (1998)
Exhaust Manifold: Service and Repair
Left Side
REMOVAL
1. Remove the oil level indicator tube.
1
Remove the nut.
2
Remove the oil level indicator tube.
3
Remove and discard the oil level indicator tube O-ring.
2. If equipped, turn the air suspension switch off.
3. Disconnect the battery ground cable.
4. Raise the vehicle on a hoist.
5. Disconnect the LH heated oxygen sensor electrical connector.
6. Remove the nuts and disconnect the Y-pipe from the LH exhaust manifold.
