F 250 4WD Pickup V6-4.2L VIN 2 (1998)
1. To install, reverse the removal procedure
^
Check the restraint system for proper operation.
NOTE: Make sure that safety belt webbing is not twisted prior to installation.
Full Bench Seat, Front Center and RH Passenger
T55 "Torx Plus" Bit
Special Tool(s)
REMOVAL
1. Remove the front center and RH passenger safety belt buckle ends.
1
Use T55 "Torx Plus" Bit to remove the buckle bolts.
2
Feed the buckle assembly up through the top of the seat cushion and remove the front seat safety belt buckles.
3
Feed the LH driver buckle and center passenger tongue assembly up through the top of the seat cushion and remove the front seat safety belt
buckle/tongue assembly.
INSTALLATION
