F 250 4WD Pickup V6-4.2L VIN 2 (1998)
9. Separate the front wheel knuckle from the front suspension lower arm.
-
Use the Pitman Arm Puller to separate the front wheel knuckle from the front suspension lower arm.
10. Remove the front wheel knuckle from the front suspension lower arm.
CAUTION: Suspend the front wheel driveshaft and joint with wire.
11. Remove the front suspension lower arm.
(1) Remove the two nuts.
(2) Remove the two bolts.
(3) Remove the front suspension lower arm and torsion bar as an assembly.
12. Separate the front suspension lower arm from the torsion bar.
INSTALLATION
1. Install the front suspension lower arm.
(1) Attach the front suspension lower arm to the torsion bar.
(2) Install the front suspension lower arm and the torsion bar as an assembly.
(3) Install the bolts and nuts.
