F 250 4WD Pickup V6-4.2L VIN 2 (1998)
10. Remove the front suspension upper arm.
(1) Remove the nuts.
(2) Remove the bolts.
(3) Remove the front suspension upper arm.
INSTALLATION
1. Install the front suspension upper arm.
(1) Position the front suspension upper arm.
(2) Install the bolts.
(3) Install the nuts.
NOTE: Align the marks made during removal on the camber adjustment cam before tightening the nuts
2. Install the front suspension arm upper ball joint castellated nut.
(1) Position the front wheel knuckle.
(2) Install the upper ball joint castellated nut.
(3) Install a new cotter pin.