F 250 4WD Pickup V6-4.2L VIN 2 (1998)
10. Use (A) Reverse Clutch Spring Compressor and (B) Clutch Spring Compressor to compress the (C) reverse clutch piston spring.
11. Install the reverse clutch piston spring retaining ring.
12. Remove Reverse Clutch Spring Compressor and Clutch Spring Compressor.
13. Install the reverse clutch front pressure plate, clutch pack and reverse clutch rear pressure plate.
NOTE: Before assembly, soak new clutch discs in transmission fluid for 15 minutes. Install the pressure plates with the flat sides facing the clutch
pack.
