F 250 4WD Pickup V6-4.2L VIN 2 (1998)
14. Install the reverse clutch pressure plate retainer snap ring.
15. Position and zero Dial Indicator With Bracketry on the reverse clutch pack.
^
Push downward on the clutch pack.
^
Release pressure and zero the dial indicator.
16. Check the reverse clutch pack clearance.
1
Lift up on the clutch pack until it fully seats against the reverse clutch pressure plate retainer.
2
Read the dial indicator.
^
If clearance is not within specifications, install the correct size retaining ring.
