F 250 4WD Pickup V6-4.2L VIN 2 (1998)
NOTE: Use the Digital TR Sensor Alignment Tool for the digital TR sensor.
6. Use the Digital TR Sensor Alignment Tool to align the digital TR sensor slots.
NOTE: The manual shift lever must be in the neutral position.
7. Tighten the bolts.
8. Install the manual control lever.
1
Position the manual control lever.
2
Install a new manual lever shaft outer nut.
9. With manual lever in OVERDRIVE, connect the shift control cable.
10. Install digital TR sensor electrical connector.
11. Install the filter and transmission fluid pan.
