F 250 4WD Pickup V6-4.2L VIN 2 (1998)
Torque Converter: Testing and Inspection
Leakage Checks
1. Clean the outside surface of the torque converter.
2. Install Torque Converter Leak Check Tool and Gasket into converter hub.
3. Install the torque converter with the installed leak check tool into the arbor press. Secure the press. Apply enough force from the press to seal tool
into the torque converter.
WARNING: ALWAYS FOLLOW PROPER SAFETY PROCEDURES WHILE USING PRESS.
4. Apply air pressure to valve on leak check tool.
NOTE: Use clean dry shop air.